LJS Concrete Adhesive
Increases adhesion strength to repair surfaces
LJS CONCRETE ADHESIVE is a concentrated liquid bonding agent used in the repair of non pores surfaces. It is use to increase the physical strength and chemical resistance properties when applying repair material to all types of surfaces The product will also provide increased adhesion to old concrete, masonry, brick, stone, concrete block, wood, metal and all types of other surfaces.
Benefits
- Creates a strong bond to all repair surfaces
- Increased resistance to freeze-thaw cycles
- Helps control cracking or shrinkage around repair surfaces
- Will not emulsify when fully cured
- Helps to reduce application cost
Application
Open container and mix thoroughly. Do not reduce with water. Apply to prepared surface uncut for best results. Use brush or roller for small application. On large surface areas apply by low pressure spray tank with large nozzle opening.
Technical Data / Specifications
- Appearance: Colorless and clear
- PH: N/A
- Vapor Density: 4.900@ air=1
- Odor: slight, hydrocarbon
- Chemistry: Modified Polymethal Siloxane
- Solvent System: Aliphatic Hydrocarbons (mineral spirits)
- Solids Content: 94.5%
- VOC Content: 100%; 6.49 lbs/gal
- Evaporation Rate: >.11
- Vapor Pressure: 2.000 mmHg @ 68F
- Specific Gravity: .758 @ 60F
- % Volatile: 100
- State: Liquid
- Boiling Point (F): 340-400
- Sealer Type: Silicone Siloxate water repellent
- Coverage: 75-150 sq/ft per gallon
- Penetration: up to 1” or more / surface porosity
- Packaging: 5 gallon pails
- Color: Colorless, clear
- Shelf Life: 24 months
Photo Gallery
Copyright © 2018 LJSpecialties - All Rights Reserved.
Powered by GoDaddy Website Builder
